RMC Multi-Jet Water Meter

The RMC Multi-jet Water Meter has been a staple in the Australian market for decades,
This meter's multi-jet design means there are multiple entry points to turn the turbine inside the meter resulting in a more
forgiving meter if you end up getting some small impurities getting past the strainer.

These meters are great for use in settings where you can install them in the horizontal plane and may have been suffering from blockages with other domestic meters.

The 20mm and 25mm variants are NMI R-49 pattern approved and can be used for billing purposes. They also feature a watermark allowing them to comply with the Australian
plumbing code.

The 32mm,40mm and 50mm have a slightly lower level of accuracy and no longer comply with the NMI standard. They are still a very accurate meter, but you will need to use them in
non trade situations where you are not charging people for the water. They are still useful in agricultural applications and some industrial applications where these requirements are not needed.

If you require an NMI Approved and Watermarked 32mm and 40mm meter see our Elster V100 meters and for 50mm our iTron FloStar or ARAD Octave Ultrasonic.

Key information

• Watermarked - 20mm & 25mm Only
• NMI approved - 20mm & 25mm Only
• Less prone to blockage than a positive displacement meters
• 1 pulse per 10L with optional WM598 Reed Switch
• Available for recycled use (Lilac)
• Horizontal install only

Note: 32mm,40mm and 50mm are for non trade applications only.